TypeHigh-strength magnets
ColorSilver
MaterialSteel
BrandProLite
Print/DownloadProduct Spec Sheet
Stop ceiling tiles from lifting, shifting, or rattling - without bulky clips or messy adhesives.
Our adhesive-backed rare earth magnets are designed to attach directly to the back of your ceiling tiles and hold them securely to the metal T-bar grid. Whether you're dealing with pressure changes, airflow, or vibration, these magnets keep your tiles exactly where they belong.
In many installations, ceiling tiles can lift due to:
Air pressure changes (doors opening/closing, HVAC systems)
Wind exposure in commercial or exterior-adjacent spaces
Temperature fluctuations
High airflow environments
Traditional solutions like uplift clips help, but they can be time-consuming, visible from above, and sometimes restrictive.
Our magnetic system is a cleaner, faster, and more flexible alternative.
Uplift clips are commonly used to prevent tile movement caused by air pressure or wind - but magnets achieve the same goal with a simpler, more modern approach.
Made from neodymium (rare earth material), these magnets provide exceptional holding strength in a compact size at 4.6 LBS.
No tools. No screws. No mess.
Just peel the backing and apply directly to the tile.
Installed on the back of the tile-completely hidden from view.
Install in seconds per tile vs. time-consuming clip placement.
Designed to bond directly to metal ceiling grid systems.
Easily reposition tiles without damaging the grid or tile.
Peel the adhesive backing
Stick the magnet to the back of the ceiling tile in each corner and middle if 2x4's are being used
Place the tile into the grid
The magnet grabs the T-bar and holds the tile securely in place
That’s it.
No tools. No hardware. No headaches.
These magnets are ideal for:
Areas near doors (pressure changes)
Commercial spaces with strong HVAC airflow
Basements or rooms with air movement
Lightweight ceiling tiles (PVC, vinyl, thin panels)
Any installation where tiles tend to lift or shift
Use 4-8 magnets per tile depending on 2x2 or 2x4 tiles
Focus on problem areas (doors, vents, high airflow zones)
Add more magnets for extra holding power if needed
(Comparable clip systems typically require 1–2 clips per tile in affected areas )
Quantity: 50 10x4mm magnets per bag
Material: Rare Earth Neodymium Magnet
Backing: Industrial adhesive
Compatibility: Metal T-bar ceiling grids
Installation Type: Peel-and-stick
| Feature | Magnetic Fasteners | Uplift Clips |
|---|---|---|
| Installation | Peel & stick | Clip onto grid |
| Visibility | Hidden | Visible from above |
| Speed | Very fast | Slower |
| Adjustability | Easy repositioning | Fixed placement |
| Tile Protection | No pressure points | Can apply pressure |
| Cleanliness | No tools, no mess | Manual installation |
Faster installs = lower labor cost
No callbacks for rattling tiles
Cleaner finished look
Easier adjustments during install
Works great with modern lightweight tiles
Use magnets in combination with proper grid installation and tile fitment for maximum performance. For extreme conditions, magnets can be supplemented with traditional methods. Frequently Asked Questions Will these work with all ceiling tiles? Best for lightweight tiles like PVC, vinyl, and thin panels. Can they be removed? Yes, tiles can be lifted and repositioned as needed. Are they strong enough? Yes. Rare earth magnets are the strongest type of permanent magnet available . The Bottom Line If you?re tired of tiles lifting, shifting, or rattling, this is the simplest and cleanest solution available. No clips. No mess. Just a secure ceiling that stays in place.
