Delivery Time3-10 Business Days
Special InstructionsEach Kit Contains 25 Main Covers
and 11 Wall Angle Covers. See below for information on how many kits to order
Print/DownloadProduct Spec Sheet
Sold as a kit, these EZ-On Grid Covers are a perfect color match to our Prolite white ceiling tiles. They are made from waterproof rigid vinyl and fit over standard 15/16" - 1" drop ceiling grids. Discover how easy they are to install. Simply slide the covers over your existing grid. The kit includes 25 Main Covers and 11 Wall Angle Covers. The Main Covers fit over main beams and cross Ts. The Wall Angle Covers fit over the grid pieces along the perimeter. Each individual cover is 1 x 24.
WHAT TO ORDER:
Wall Angle Covers
The Wall Angle Covers are used for the perimeter of the grid, anywhere your grid runs along a wall. Measure the total inches of one wall at a time. Divide that number by 24. Round up to the nearest whole number. This gives you the number of Wall Angle Cover pieces needed for the measured wall. After calculating each wall, add the total number of Wall Angle Cover pieces. This will be the total of Wall Angle Covers to purchase. We recommend ordering a few additional pieces, especially if your installation involves any unique angles or many cuts.
The Main Covers are used for the main beams and cross tees. To ensure that you purchase the correct number of Main Covers, it is important to measure and calculate each row individually. Measure the total inches of a row. Divide that number by 24. Round up to the nearest whole number. This gives you the number of Main Cover pieces needed for that row. Repeat the process for each row of main beams and cross tees. Once all the runs are calculated, add up the pieces. This is the total of Main Covers to purchase. We recommend ordering a few additional pieces, especially if your installation involves any unique angles or large border tiles.
Helpful Hints: Instead of using a ladder and measuring up against the ceiling grid, measure along the floor. You will save time and energy. Make sure you account for the amount of drop or waste that you will have when cutting the grid covers to size. Partial tiles that are over 12" long may leave you with smaller cut pieces that do not fit any other tiles.
Compare your total number of wall angles covers and main beam covers to the EZ-On Grid Cover kit bundle - 25 Main Covers and 11 Wall Angle Covers. Round up to the nearest number of kit(s) needed or order a combination of kit(s) and individual remaining parts:
EZ-On Covers offer an easy and effective way to coordinate the color of white ProLite ceiling tiles with your grid. They are pre-cut into 2 foot long strips, are made from 100% waterproof and recyclable rigid vinyl, and do not require special tools or adhesive. This makes them truly easy to install without a mess, making your suspension system look brand new.
Things to Consider:
When applying the covers to your grid, you will butt them up to one another. The tab on the end of the cover can be easily cut in areas where it is not needed. This usually occurs where grid pieces intersect.
Greenguard Gold Certification offers strict certification criteria that considers safety factors to account for sensitive individuals (such as children and the elderly), and ensures that a product is acceptable for use in environments such as schools and healthcare facilities. It is referenced by both The Collaborative for High Performance Schools (CHPS) and the Leadership in Energy and Environmental Design (LEED) Building Rating System. Click here for more information.
Certain ProLite ceiling tiles are approved drop-out ceiling panels that can be installed beneath fire sprinklers. When exposed to heat from a developing fire, drop-out ceiling panels soften, distort, and fall from the ceiling grid. Heat from the growing fire activates the sprinkler which, unimpeded by the panels, controls or extinguishes the fire. Click here for more information.
Materials used in the construction of the tile(s) are 100% waterproof.
Class A Fire Rated
Tiles have been tested in accordance with ASTM 84e and scored a Class A rating for flame spread and smoke generation.
The ceiling tile manufacturer guarantees that your tiles will be free from manufacturing defects for a period of five years from the date of purchase.
This warranty does not cover problems caused by improper installation methods. It covers only installations done in accordance with the installation and handling instructions available on this website. This warranty does not cover damage caused by improper maintenance or by use contrary to our recommendations. This warranty does not cover normal wear and tear or shade changes due to exposure to smoke, fumes, leaks, or abuse. This warranty does not cover labor charges. This warranty applies only to material purchased by you, the owner, in unopened cartons for your own use and not for resale. This warranty is not transferable and applies to the original purchaser only. Please Note: We cannot guarantee that the published surface burning characteristics, fire resistance ratings, acoustical performance, dimensional stability / sag, or light reflectance will remain as stated if the tiles are painted. Painting will void this warranty & any certification(s). Painting will void UL approval for installation under fire suppression sprinkler systems.
Difference from Photos
This warranty does not cover differences between photographs and actual products purchased.
There are no implied warranties, representations or conditions, except those required by statute, and they shall not extend beyond the term of the warranty applicable to your purchase.
Consequential or Incidental Damages
We exclude and will not pay any consequential or incidental damage, loss or expense.
This warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction.
If a manufacturing defect does occur within the terms and conditions of this warranty, you will be supplied with new material to replace the defective parts, subject to inspection and approval by our company. The replacement materials will be of the same or similar design and quality.
We know that projects take a while, and sometimes plans change. That's why, in most cases, we give our customers a 90 day grace period to return products. The products must be unused/new and in their original boxes.
We are unable to replace items that have been modified or installed, so please review all the contents of your shipment for damage and to verify that the items received are correct. Damaged items or items shipped in error that are not modified will be replaced promptly.
Custom products do not qualify for a refund if returned. Custom products include, but are not limited to, the Imagination Series, Leather & Wood Tiles, and Custom Tile categories.
Partial Returns of Items with Quantity Discounts
In the event that an order qualified for and received a quantity discount, special consideration must be taken when accepting a partial return of the specific product that qualified for the quantity discount. If a customer's request to return a specific amount of product breaks the initial quantity required to qualify for a discount, it is possible that the customer will not receive a refund for the returned items. This is because we have extended a generous discount for a bulk buy, which may no longer applicable if a portion of the product is returned.
A refund involving an order that included a quantity discount can be examined in the following example:
Bill purchased 400 of a particular ceiling tile which cost $ 4.25 per tile (a $ 0.74/tile discount when purchasing 400 or more). His order also qualified for free shipping and he was not subject to sales tax. The order total was $ 1700.00.
After Bill finished his project, he decided that he did not need 30 of his tiles, and he wishes to return them. We must treat Bill's order as if he originally purchased 370 ceiling tiles, which means he would have not qualified for the $ 0.74 per tile quantity discount. If Bill had only purchased 370 tiles, the tiles would have cost $ 4.99 per tile and his order total would have been $ 1846.30.
In this particular case, Bill's new order total ($ 1,846.30) would actually be more than what he originally paid ($ 1,700.00). While we wouldn't charge Bill the difference when returning the tiles, we also would not be able to provide any refund. It would be better for Bill to keep the tiles and save on the return shipping.
When and how will a customer be refunded?
If products are returned within 90 days of the purchase, the customer's credit card will be refunded electronically. If products are returned toward the end of the 90 day period, and the refund does not take effect within 90 days of the purchase date, the refund will be issued by check and sent by USPS. Returns may take up to 2 weeks to be processed.
Packaging Items for their Return
Please be careful when packaging items for returns. You will be responsible for damage incurred during shipping, so please package the items accordingly. Retain the paperwork that the shipping company gives you, especially the tracking number. Remember, you will be responsible for the items until we receive them.
Making A Return
Need to return extra tiles or perhaps select a different style? Just give us a call and we'll be glad to help!
Main Covers install along your suspended ceiling's main beams and cross T's (basically every section that doesn't run along a wall). They have a tab at one end to cover grid intersections and a lip that allows the cover to "click" into place.
Wall Angle Covers install everywhere your grid runs along a wall. They slide easily onto your wall angle and are pre-cut to fit 2ft. x 2 ft. grid sections perfectly. Trim with scissors as needed in corners, and use three pieces for 2 ft. x 4 ft. sections.