TypeFor Grid Use Only
Thickness.013" - Cuts easily with scissors
Special InstructionsOne roll for every 80 sq ft of ceiling. Approx. 20 each of the 2'x2' tiles or 12 each of the 2'x4' tiles.
Not recommended for installations where ceiling temperatures exceed 120°F
Print/DownloadProduct Spec Sheet
Available in the same variety of colors as our ProLite Tiles, the Decorative Grid Tape is designed to cover the drop-ceiling suspended grid system installations.
Easy to trim to size with household scissors, this tape makes the T-bar disappear, leaving nothing to detract from your new beautifully crafted, custom ceiling.
Small dabs of tile adhesive should be applied to the back of the tape every 6 inches. The adhesive backing on the tape IS NOT a permanent adhesive but allows for it to stick to the ceiling long enough for the glue to cure. Failure to use glue may result in the failure of the tape to adhere to the ceiling.
One tube of our Direct Mount Adhesive is included free with every 5 rolls of tape.
Designed to fit all standard 15/16" - 1" T-Bar Ceiling Systems.
Greenguard Gold Certification offers strict certification criteria that considers safety factors to account for sensitive individuals (such as children and the elderly), and ensures that a product is acceptable for use in environments such as schools and healthcare facilities. It is referenced by both The Collaborative for High Performance Schools (CHPS) and the Leadership in Energy and Environmental Design (LEED) Building Rating System. Click here for more information.
Certain ProLite ceiling tiles are approved drop-out ceiling panels that can be installed beneath fire sprinklers. When exposed to heat from a developing fire, drop-out ceiling panels soften, distort, and fall from the ceiling grid. Heat from the growing fire activates the sprinkler which, unimpeded by the panels, controls or extinguishes the fire. Click here for more information.
Materials used in the construction of the tile(s) are 100% waterproof.
Class A Fire Rated
Tiles have been tested in accordance with ASTM 84e and scored a Class A rating for flame spread and smoke generation.
The ceiling product manufacturer guarantees that your tape will be free from manufacturing defects for a period of five years from the date of purchase.
This warranty does not cover problems caused by improper installation methods. It covers only installations done in accordance with the installation and handling instructions available on this website. This warranty does not cover damage caused by improper maintenance or by use contrary to our recommendations. This warranty does not cover normal wear and tear or shade changes due to exposure to smoke, fumes, leaks, or abuse. This warranty does not cover labor charges. This warranty applies only to material purchased by you, the owner, in unopened cartons for your own use and not for resale. This warranty is not transferable and applies to the original purchaser only. Please Note: We cannot guarantee that the published surface burning characteristics, fire resistance ratings, acoustical performance, dimensional stability / sag, or light reflectance will remain as stated if the tape is painted. Painting will void this warranty & any certification(s). Painting will void UL approval for installation under fire suppression sprinkler systems.
Difference from Photos
This warranty does not cover differences between photographs and actual products purchased.
There are no implied warranties, representations or conditions, except those required by statute, and they shall not extend beyond the term of the warranty applicable to your purchase.
Consequential or Incidental Damages
We exclude and will not pay any consequential or incidental damage, loss or expense.
This warranty gives you specific legal rights, and you may have other rights which vary by jurisdiction.
If a manufacturing defect does occur within the terms and conditions of this warranty, you will be supplied with new material to replace the defective parts, subject to inspection and approval by our company. The replacement materials will be of the same or similar design and quality.
We know that projects take a while, and sometimes plans change. That's why, we offer a great return policy on all non-custom products:
Remove dirt and oils from grid using rubbing alcohol or 409.
Make sure the temperature in the room is 60-80F and low humidity.
Small dabs of direct mount adhesive (a.k.a. glue) must be applied to the back of the tape every 6 inches. Drag the dab along the length to spread it out somewhat. The self-adhesive backing on the strips/tape IS NOT a permanent adhesive, it is meant to hold long enough for the glue to cure. Failure to use glue may result in the failure of the tape to adhere to the ceiling. Approximately 1 Tube of adhesive is needed per 5 rolls of tape. We provide Red Devil General Purpose Construction Adhesive free with purchase or you can use a more expensive adhesive like Loctite Power Grab All Purpose (available locally in most big box stores).
Trim to fit exactly; do not overlap the tape in any areas.